Panasonic kx-tg8280fx Manuel D’Utilisation

54

The unit does not 
record new messages.

L

The answering system is not turned on for the line you 
wish to record messages from. Select the desired line 
or both lines, then turn the answering system on 
(page 36).

L

The recording time is set to “Greeting Only”. 
Select “1 Minute” or “3 Minutes” (page 42).

L

The answering system is activated for both lines, and 
the 1st caller is leaving a voice message. The 2nd 
caller cannot leave a message, but the caller 
information will be stored (page 34).

L

If you subscribe to the voice mail service, messages 
are recorded by your service provider/telephone 
company not your telephone. Change the unit’s 
“Number of Rings” setting or consult your service 
provider/telephone company (page 42).

I cannot operate the 
answering system with 
the handset.

L

The base unit or another handset is being used. Wait 
for the other user to finish.

L

A caller is leaving a message. Wait for the caller to 
finish.

L

The handset is too far from the base unit. Move 
closer.

When I try to operate 
the answering system 
with the base unit, 
{

ANSWER ON} on the 

base unit flashes for a 
few seconds and I 
cannot operate the 
answering system.

L

Another handset is being used. Wait for the other user 
to finish.

L

The answering system is being operated remotely 
from outside. Wait for the caller to finish.

I cannot operate the 
answering system 
remotely.

L

You are entering the wrong remote access code. If 
you forget the remote access code, store a new 
remote access code and try again (page 40).

L

Press each key firmly.

L

The answering system is turned off. Turn it on
(page 41).

L

You are using a rotary/pulse telephone. Try again 
using a touch-tone phone.

TG8280FX(e).book  Page 54  Tuesday, September 11, 2007  1:52 PM