Panasonic nv-hv61px Manuel D’Utilisation

Page de 20
18
Crystal View Control
The crystal view control function ensures that you always 
obtain the optimum picture quality so that you get the best 
picture automatically.
Adjusting the Playback Picture
Under normal conditions, the VCR automatically adjusts the 
playback picture for optimum quality. However, in some cases 
it may be necessary to adjust it manually.
If the Picture Contains Noise Bars and It Is Not Clear to 
See (Tracking adjustment):
If noise bars appear during normal playback, slow playback or 
still playback, follow the operations below.
During normal or slow playback, press 
[TRACKING/V-LOCK] 
(20) 
_ or ` 
until the bars noise disappear.
• If the noise bars appear during still 
playback, switch the VCR over to the 
slow playback mode and then adjust 
the tracking as explained above.
To Return to Auto Tracking:
Press both [TRACKING/V-LOCK] 
(20) 
_ and ` simultaneously.
If the Still Picture shaking (V-Lock Adjustment):
If the still picture shakes, perform the following operation.
During still playback, keep [TRACKING/V-LOCK
(20) 
_ or ` 
pressed until the picture stops shaking.
Precautions:
• With certain TV models and tapes, it may not be possible to 
adjust the tracking.
• If you play back a cassette that was recorded on another 
VCR, the picture quality may be inferior and it may be 
necessary to adjust the tracking. Also, on some TVs, the 
picture may shake in the special playback functions.
However, these are not malfunctions.
Dirt on the video heads
If the video heads get dirty, pictures will not be recorded or 
played back clearly.
(See the following conditions.)
If this happens, insert and eject a cassette 5-10 times 
successively to remove the dirt from the video heads. 
If the problem still persists after performing above, contact a 
service personnel to request assistance.
Normal picture
Small amount 
of dirt
Large amount 
of dirt
TV screen
Playback picture 
containing noise bars
NV-HV61PX.book  18 ページ  2004年3月4日 木曜日 午前9時10分