honda-power-equipment harmony ii hrs216pda Manuel D’Utilisation

Blade Removal and Installation
If you remove the blade(s), use a torque wrench for installation. Wear 
heavy gloves to protect your hands. To avoid weakening the blade(s), 
or causing imbalance or poor cutting, the blade(s) should be 
sharpened by trained staff at an authorized Honda servicing dealer. If 
replacing the blade, use a genuine Honda replacement blade(s) or 
equivalent.

Blade Removal
1. Turn the fuel valve to OFF. Disconnect the spark plug cap, then tilt 

the mower to the right side (air filter side up).

2. Remove the two blade bolts with a 14 mm socket. Use a wooden 

block to prevent the blade(s) from turning when removing the bolts. 
Remove the blade(s) from the blade holder.

Always use an upper and lower blade on the HRR models.