honda-power-equipment harmony ii hrs216pda Manuel D’Utilisation

Draining the Fuel Tank and Carburetor
1. Remove the carburetor drain bolt with a 10 mm wrench, and drain 

the carburetor bowl fuel into an approved container.

2. Turn the fuel valve ON (page 9). 

This will allow fuel in the fuel tank 
to drain through the carburetor 
bowl. After the fuel is completely 
drained, reinstall the drain bolt.

Engine Oil
Change the engine oil (page 34).

Engine Cylinder
Remove the spark plug (page 36). Pour a tablespoon (5 ~ 10 cc) of 
clean engine oil into the cylinder. Pull the starter rope several times to 
distribute the oil in the cylinder. Reinstall the spark plug. Pull the starter 
rope slowly until resistance is felt, then return the starter grip gently. 
This closes the valves so moisture cannot enter.
Handlebar Folding    
Remove the grass bag (if installed). 
Loosen the handlebar locking knobs. 
Press each side of the lower handlebar 
outward, then swing the handlebar 
upward. Don’t allow the cables to be 
bent or pinched.



Gasoline is highly flammable and explosive.
You can be burned or seriously injured when 
handling fuel.
• Stop the engine and keep heat, sparks, and 

flame away.

• Handle fuel only outdoors.
• Wipe up spills immediately.