Panasonic tx-26led7fa Manuel D’Utilisation

Page de 44
5
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the mains plug
Caution
Blocked ventilation by curtains, 
etc. may cause overheating, fi re 
or electrical shock.
Do not block the rear air vents
Notes
Maintenance
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral 
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Electronic equipment
In particular, do not place video equipment too close 
the TV (electromagnetic interference may distort 
images / sound).
Equipment with an infrared sensor
Remote Controller of this TV also emits infrared rays 
(this may affect operation of other equipment).
Keep the TV away from these equipment
If no signal is received and no operation is 
performed in TV mode for 30 minutes, the TV will 
automatically go to standby mode.
Auto power standby function
Transporting the TV with its display panel 
facing upright or downward may cause 
damage to the internal circuitry.
Transport only in upright position
Remove the mains plug from the wall 
socket when TV is not in use for a 
prolonged period of time. Remove the 
mains plug from the wall socket before 
connecting or disconnecting any leads.
This TV will still consume some power even in 
the Standby mode, as long as the mains plug 
is still connected to a live socket outlet. On /Off 
switch see page 7.
Do not expose your ears to excessive 
sound pressure from headphones. 
Irreversible damage can be caused.
Allow suffi cient space around the 
TV for radiated heat
10
10
10
10
(cm)
TV Stand
Minimum distance