Panasonic tx-86pw100a Manuel D’Utilisation

35

This remote control has been designed to work with a variety of VCRs, Laser Discs and DVD players. In order
for this to occur, the setting for the VCR, LD or DVD must be programmed into the Remote Control.

1.

To set a VCR, slide the remote control VCR-LD/DVD switch

to VCR.

To set a LD or DVD, slide the remote control VCR-LD/DVD switch

to LD/DVD.

2.

Push the remote control VCR - LD/DVD Power Button

and keep it Pushed.

3.

Enter the Manufacturer’s two-digit code number using the remote control Number Buttons  (The codes

are shown below).

4.

Push the STOP

button .

5.

Release the remote control VCR or LD/DVD Power button.

6.

Check the operation of the VCR, LD or DVD. If it does not operate correctly, repeat steps 1 to 5 and use

an alternate code (if there is one).

Manufacturer

Code

Manufacturer

Code

Panasonic /

10, 11, 12, 13

NEC

40, 41, 42, 43

National

ORION

45, 46

AIWA

15, 16

Philips

50

FUJITSU

20

SANYO

55, 56, 57, 58

HITACHI

25, 26, 27

SHARP

60, 61

JVC

30, 31, 32

SONY

65, 66, 67

MITSUBISHI

35, 36

TOSHIBA

70, 71

Manufacturer

Code

Manufacturer

Code

Panasonic 

10, 11, 12, 13

SAMSUNG

30

KENWOOD

15, 16

SHARP

35

PHILIPS

20

SONY

40, 41, 42, 43

PIONEER

25

Manufacturer

Code

Panasonic 

70

1.

If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be
reprogrammed.

2.

The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any
other manufacturer’s product will work with this remote control.