Panasonic WJ-HD316 Manuel D’Utilisation

99

z Rotate the jog dial to select ON for a desired camera

channel for which the motion detection function is to be
applied, and press the SET button.

The "VMD Setup" window will be displayed.

x Rotate the jog dial to select "SETUP AREA" on the status

bar.
Note: To set all areas on the monitor as the motion

detection area, select "ALL AREAS" and press the
SET button.

The cross cursor will be displayed on the "VMD Setup" win-
dow.

c Move the cross cursor to a desired point to be set as

the start point of the motion detection area using the
arrows button, and press the SET button.

The start point of the motion detection area is assigned.

v Move the cross cursor to a desired point to be set as

the end point of the motion detection area using the
arrows button, and press the SET button.

The motion detection area is set with the start point and the
end point as the points at opposite angles of the motion
detection area.

b Repeat steps 3 and 4 to set another motion detection

area.
Up to 4 areas can be set. The newly created areas will
be named automatically as A, B, C and D in the order of
creation.

n To complete the settings, rotate the jog dial to select

"EXIT" on the status bar, and press the SET button.

→ The "VMD Setup" window will be closed.

● Delete the motion detection area
[Screenshot 1]

Start operation from the "VMD Setup" window.

z Rotate the jog dial to select "DELETE AREA" on the sta-

tus bar.
Note: After selecting "DELETE ALL AREAS", pressing

the SET button will delete all of the motion detection
areas.

The cross cursor will be displayed on the "VMD Setup" win-
dow.