Panasonic vb43060 Manuel D’Utilisation
Section 700-Operation
Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700
DBS Manual - Revised April 2000
Page A-13
• Or, to exit the directory without selecting a number to dial,
press the END key or go on-hook.
Notes
Incompatibility with older phone versions. Directory Mode is available
on the 44-Series phones only.
on the 44-Series phones only.
Hot Dial Pad and Directory Mode. The Hot Dial Pad feature (FF3
ExtPort# 48#) will not work on an extension in Directory Mode.
ExtPort# 48#) will not work on an extension in Directory Mode.
Variable Mode
Description
This feature applies to the 44-Series small-display phone only (i.e., phones
with a 2-line LCD display).
with a 2-line LCD display).
When the phone is in Variable Mode, the features for Flexible Function
Screen select keys 1 and 2 will display during each of the following call
states:
Screen select keys 1 and 2 will display during each of the following call
states:
Call State
Existing Program Address*
• During an intercom call
FF3 (ExtPort)# 28# (25-39)#
• During CO dial tone
FF3 (ExtPort)# 29# (25-39)#
• During a trunk call
FF3 (ExtPort)# 30# (25-39)#
• After dialing a busy extension FF3 (ExtPort)# 33# (25-39)#
* In these addresses, you assign a Flexible Function Screen (25-39) to
appear on the extension while it is in the call state.
appear on the extension while it is in the call state.
Operation
The select keys on the 44-Series small-display phone are labeled “>” and
“<“to the left and right of the display’s 2nd line. Pressing select key 1 (“>”
on the left) or select key 2 (“<“on the right) will perform the displayed
feature.
“<“to the left and right of the display’s 2nd line. Pressing select key 1 (“>”
on the left) or select key 2 (“<“on the right) will perform the displayed
feature.
To use Variable Mode:
1.
Activate Variable Mode by pressing
ON/OFF *61 ON/OFF
.
• When you dial
*61
in the above sequence, the 1st line of the
LCD will display “Variable md ON”. The display will
return to normal when you press the second
return to normal when you press the second
ON/OFF
.
• The
*61
code toggles Variable Mode on and off. Press
ON/OFF *61
ON/OFF
again to turn Variable Mode off.
2.
While the extension is engaged in an intercom call, the 2nd line
will display select key 1 and 2 features from the Flexible
Function Screen assigned to display in FF3 ExtPort# 28#. The
same applies when the extension receives CO dial tone (FF3
will display select key 1 and 2 features from the Flexible
Function Screen assigned to display in FF3 ExtPort# 28#. The
same applies when the extension receives CO dial tone (FF3