Panasonic wj-hd220 Manuel D’Utilisation
35
6. If you do not need to change the resolution, press the
[SETUP/ESC] button. The menu will return to step 1
above.
above.
7. If you intend to change it, rotate the JogDial to select
YES and press the JogDial.
The recorded data will be erased while "NOW ERAS-
ING" is displayed for a few seconds.
ING" is displayed for a few seconds.
Notes:
• The number of days includes today as 1 day, there-
fore 2DAYS covers today and yesterday.
• Auto erasing is implemented at 24:00 midnight.
Playback will stop once when the time reaches
24:00, then will restart with a different portion based
on the renewed day count.
24:00, then will restart with a different portion based
on the renewed day count.
● Resolution (RESOLUTION)
Notes:
• We recommend that you perform this setup before
starting to operate the system. Changing the resolution
is an irrevocable procedure that results in the erasure of
all data previously recorded.
is an irrevocable procedure that results in the erasure of
all data previously recorded.
• When a new resolution is selected, the screen MAIN
MENU changes to a camera image. The recorder then
reboots with the new resolution applied.
reboots with the new resolution applied.
1. Move the cursor to RESOLUTION and press the
JogDIal.
2. A password prompt is displayed. Enter a registered
password using CAM SEL buttons 1-8.
3. If the correct password is entered, the prompt screen
returns to the previous menu and resolution selection
becomes possible.
becomes possible.
4. Rotate the JogDial to select a resolution and press the
JogDial.
The default is NORMAL.
The default is NORMAL.
NORMAL: Normal resolution
SIF: Source Image Format (lower than NORMAL)
SIF: Source Image Format (lower than NORMAL)
5. Confirmation prompt is displayed.
SYSTEM SETUP (2 OF 2)
PASSWORD
/
-
-----
SYSTEM SETUP (2 OF 2)
********WARNING*********
ALL OF THE DATA
IN THE DISK
IS GOING TO BE ERASED.
ALL OF THE DATA
IN THE DISK
IS GOING TO BE ERASED.
ERASE?
-
NO