Panasonic vw-bn2pp Manuel D’Utilisation

Page de 24
15
LSQT1571
(ENG)
¬ Troubleshooting
Problem
Check points
This unit cannot be 
turned on.
≥ Is the AC adaptor connected?
> Connect the AC adaptor and the AC cable correctly. (P9)
This unit cannot be 
operated even when 
powered up.
This unit does not 
operate normally.
≥ Disconnect the AC adaptor and then about 1 minute later 
connect it again. (Conducting the above operation when the 
access lamp is on may destroy the data on the disc.) If normal 
conditions are not restored, detach from the connected power 
source and consult the dealer who you purchased this unit from.
The 
[
<]
 button does not 
work.
≥ The disc will not eject unless this unit is powered.
> Connect the AC adaptor.
≥ The [<] button may not work when copying from a 
connected Camcorder to a disc is in progress.
> Wait until the copying is finished.
≥ In cases other than the above, detach from the connected 
power source and consult the dealer who you purchased this 
unit from.
The disc cannot be read.
Copying stops.
The playback motion 
video/pictures breaks up 
for a moment.
≥ Is the disc scratched or dirty?
> Wipe off the dirt on the disc. (P7) If the disc is scratched, 
insert a new one.
≥ The internal temperature of this unit is high. Disconnect the AC 
adaptor, wait a short while and then you will be able to use this 
unit again.
≥ Discs recorded on other devices may not be correctly read or 
played back on this device.
Cannot copy although 
power is supplied to this 
unit and the disc is 
correctly inserted.
≥ Has the disc already been used for recording video and still 
pictures?
> If the disc contains recorded material, it cannot be used 
again. Use a new disc.
> DVD-RAM, DVD-RW, +RW or CD-RW discs recorded with 
any material can be reused after formatting the disc. Since all 
data previously recorded on the disc will be deleted, confirm 
contents of the disc carefully before reformatting it.
VW-BN2PP-LSQT1571_Eng.book  15 ページ  2009年8月17日 月曜日 午前9時35分