Panasonic WV-BP120 Manuel D’Utilisation

-6-

See pages 10, 11, 12 and 13 for details on lens
selection.

This ring is used to adjust the back focal length or
picture focus by rotating this ring to clockwise. for
C-mount lens or counterclockwise for special C-
mount (CS-mount) lens.

1. Always set this ring to fully clockwise before

mounting the lens.

2. Do not turn this ring too much to counterclock-

wise when the C-mount lens is mounted as
this could damage the inner glass and CCD
image sensor.

This threaded hole (1/4" - 20) is used to mount the
camera onto a mounting bracket or tripod.

This 4-pin female connector supplies the power
and either video signal or DC control signal to the
auto iris lens.

A 4-pin male connector, which can be mated with
the camera's female connector, is supplied as a
standard accessory (Part No. YFE4191J100).
This male connector can be installed on lenses
which have incompatible type connector.
See page 14 for installation details.

This switch is used to select the supplied auto iris
control signal to the lens from the Auto iris lens
Connector.

Choose this position when the auto iris control
lens requiring DC control signal such as WV-
LA2.8, WV-LA4R5C3A, WV-LA6B2, WV-
LA9C3A, WV-LZ61/10, WV-LA12B2, WV-LA18,
WV-LA36, WV-LA4510, WV-LA608, WV-
LA1208, WV-LZ81/6, WV-LZ81/10, WV-
LZ83/6, is mounted on the camera.

Choose this position when the auto iris control
lens requiring video signal such as WV-LA8B,
WV-LA16B, WV-LA25B, WV-LA50B, is mount-
ed on the camera.