Panasonic wv-cu151 Manuel D’Utilisation
-3-
MAJOR OPERATING CONTROL AND THEIR FUNCTIONS
■
Front Panel
System Controller WV-CU
151
POWER
3
6
9
2
5
8
0
1
4
7
UP
UP
DOWN
L
R
SET
AF
I R I S
ZOOM
HOUSING
PAN
l
ON
BUSY
POWER
HOME
POSI
NEAR
FAR
FOCUS
OPEN
WIDE
CLOSE
1
PROS
CAM
MENU
ALARM
RANDOM
2
WIPER
AUTO
AUX
;
OFF
DEF
SHIFT
RESET
TELE
1. Power ON/OFF Switch (POWER: ON/OFF)
This switch is used to turn on and off the power of the
unit.
unit.
Note:
When the power switch is turned on, the power
for the camera which is supplied by the Receiver
becomes on. However, when the power switch is
turned off while the camera and the Pan-tilt head
are working, the Receiver keeps supplying the
power to the camera and the pan-tilt head.
becomes on. However, when the power switch is
turned off while the camera and the Pan-tilt head
are working, the Receiver keeps supplying the
power to the camera and the pan-tilt head.
2. Power Indicator
Indicates the Power On.
3. Alarm Reset Switch (ALARM RESET)
Used to reset the alarm signal manually.
The LED on this switch will light off from blinking after
completing the reset.
When this unit is return to the initial mode due to the
automatic reset function or recover signal supply, the
LED on this switch will light on from blinking.
The LED on this switch will light off from blinking after
completing the reset.
When this unit is return to the initial mode due to the
automatic reset function or recover signal supply, the
LED on this switch will light on from blinking.
4. Busy Indicator (BUSY)
Indicates the busy condition.
To operate this unit is not possible during lighting.
To operate this unit is not possible during lighting.
5. Shift Switch (SHIFT)
Used to select the functions of the Program Selection
Switch, Panning Selection Switch, Auxiliary Selection
Switch, Zoom/Iris Switches and Housing Switch.
Switch, Panning Selection Switch, Auxiliary Selection
Switch, Zoom/Iris Switches and Housing Switch.
Lighting:
Selects the PROG, CLOSE, OPEN, WIPER,
AUX2 or RANDOM.
Lighting Off:
Selects the CAM MENU, TELE, WIDE,
DEF, AUX1 or AUTO.
6. Camera / Program Menu Selection Switch
(CAM MENU/PROG)
Used to select the display menu.
CAM MENU:
Displays the set up menu of the camera.
PROG:
Displays the program menu of this unit.
CAM MENU and PROG selection should be made in
accordance with the Shift Switch setting.
When the selected function is activated, its indicator
will light.
accordance with the Shift Switch setting.
When the selected function is activated, its indicator
will light.
7. Zoom / Iris Control Switch
(ZOOM: TELE/WIDE, IRIS: CLOSE/OPEN)
ZOOM :
ZOOM :
Controls the lens zoom. (Tele - Wide)
IRIS:
Controls the lens iris. (Close - Open)
When the shift switch lights, the open or close position
can be selected.
can be selected.
Note:
This control works to the specified camera, such
as the WV-CS600 or WV-CS400.
8. Focus Control Switch (FOCUS: NEAR /FAR)
Used to control the lens focus.
9. Panning Selection Switch (PAN: AUTO, RANDOM)
Selects the automatic or random panning.
The movement of the random panning has been pre-
programmed by a micro-processor in the specified
receiver. The random panning functions when the
specified pan/tilt head is used.
The automatic random functions when WV-CS600, WV-
CS400 or the equivalent is used.
The movement of the random panning has been pre-
programmed by a micro-processor in the specified
receiver. The random panning functions when the
specified pan/tilt head is used.
The automatic random functions when WV-CS600, WV-
CS400 or the equivalent is used.
• When the shift switch lights, the random panning can
be selected.