Gateway E-826R Manuel D’Utilisation
Using the Configuration page
www.gateway.com
59
3
To change the IP address from a static address to a dynamic address, click
the box next to DHCP.
the box next to DHCP.
To set the network configuration:
1
To change the values of the subnet mask, gateway, Simple Network
Management Protocol (SNMP) server, or the time server, type in the new
address, using the T
Management Protocol (SNMP) server, or the time server, type in the new
address, using the T
AB
key to move from box to box.
2
Click Submit.
Setting security options
When you enable the security option, users must enter a password to access
the autoloader's front panel functionality (see
the autoloader's front panel functionality (see
). A password allows either administrator-level access or
operator-level access (see
).
To set security:
1
From any page, click Configuration. The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.
of the screen displays.
3
To enable front panel security, click the box next to Front Panel Security
Enabled.
Enabled.
If the box is blank, the security option for the front LCD panel is not
enabled.
enabled.
4
Click Submit.
To reset the front panel password:
1
From any page, click Configuration. The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.
of the screen displays.
3
Click the box next to Reset Front Panel Password. A check mark appears.
4
Click Submit.
To set User Administration:
1
From any page, click Configuration, then press E
NTER
. The Configuration
submenu opens.
2
Click Security on the left side of the screen. The System Security section
of the screen displays.
of the screen displays.