JVC dr-m10s Manuel D’Utilisation

Filename [DR-M10SE_06Name.fm]

Masterpage:Left+

Page 20

February 12, 2004 4:33 pm

D

A Press ENTER.

● The AUTO SET/T-V LINK display appears on the TV screen.

● When you have connected the unit to a TV offering T-V Link 

via a fully-wired 21-pin SCART cable (

turned on, the unit automatically performs the Preset 
Download (

pg. 21) even if you select “AUTO SET” for Auto 

Set Up function.

● In areas where no TV station transmits a PDC (Programme 

Delivery Control) signal, the unit can perform neither Auto 
Clock Set nor Auto Guide Program Number Set.

● If there is a power cut, or if you press 1 or SET UP while Auto 

Set Up is in progress, Auto Set Up will be interrupted; be sure 
to turn off the unit power once and try again from step

● Auto Clock Set may not function properly depending on the 

reception condition.

● If no sound accompanies the picture or the audio sounds 

unnatural on some channels that have been stored by Auto Set 
Up, the TV system setting for those channels may be incorrect. 
Select the appropriate TV system for those channels. 
(

B Press rt to move the 

arrow to “AUTO 
EINSTELLUNG”, then 
press ENTER.

“AUTO” blinks on the front display panel; do NOT 
press any button on the unit or remote control until 
the front display panel shows “– –:– –” as illustrated 
on page 22.

● The AUTO SET screen will 

appear.

Once you have performed Auto Set Up, even if the unit’s 
memory backup has expired, all the stored stations and their 
Guide Program numbers remain in the unit’s memory and 
the unit will not perform Auto Set Up again. The unit only 
performs Auto Clock Set when the unit is turned on.
If you have moved to a different area, perform each setting as 
required.

● Tuner setting (

● Clock setting (

If a new station starts broadcasting in your area, perform 
tuner setting. (

After “Auto Set Up” is completed, perform “Monitor 
Set” on page 23.

DR-M10SE_01.book  Page 20  Thursday, February 12, 2004  9:08 PM