kymco mo p250 Instruction De Maintenance
19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS
19-2
PEOPLE 250
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• After installation of each switch, a continuity check must be performed. A continuity check can
• After installation of each switch, a continuity check must be performed. A continuity check can
usually be made without removing the part from the motorcycle.
TESTING INSTRUMENT
Electric tester
Electric tester
TROUBLESHOOTING
Lights do not come on when ignition
Temperature gauge does not register
switch is “ON”
correctly
• Burned bulb
• Faulty temperature gauge
• Faulty switch
• Faulty thermosensor
• Poorly connected, broken or shorted wire
• Broken or shorted wire between
temperature gauge and thermosensor
Fuel gauge pointer does not move or
register correctly
• Faulty fuel gauge
• Faulty fuel unit
• Poorly connected wire between fuel
• Faulty fuel gauge
• Faulty fuel unit
• Poorly connected wire between fuel
gauge and fuel unit
• Fuse burned out
SPECIFICATIONS
Fuse
Fuse
10A,15A,30A
Headlight bulb
12V 35W/35W
Turn signal light bulb
12V 10W
Stoplight/taillight
12V 21/5W
License plate light
12V 5W
Position light
12V 5W
Turn signal indicator light
12V 3W