kymco mo p250 Instruction De Maintenance

Remove the seat, met-in box and carrier. (!2-

6)

Remove the body cover, center cover and rear

fender A together. (!2-6)

Remove the nut goes to the starter relay and

relax cable band to disconnect the starter

motor cable.

Remove the two starter motor mounting bolts

and the motor.

DISASSEMBLY
Remove the two starter motor case screws,

front cover, rear cover, motor case and other

parts.

INSPECTION
Inspect the removed parts for wear, damage

or discoloration.  Replace if necessary.

Clean the commutator if there is metal

powder between the segments.

AC 110V

Nut

• Before removing the starter motor, turn

the ignition switch OFF and remove

the battery ground.  Then, turn on the

ignition switch and push the starter

button to see if the starter motor

operates  properly.

＊

Starter Motor Cable

Band

Bolts

Motor  Case

Rear Cover

Front  Cover

Case Screws

Commutator