kymco mo p250 Instruction De Maintenance

Install the A.C. generator stator on the right

crankcase cover and secure it with the three

bolts.

Install the pulser coil on the right crankcase

cover and secure it with the two screws.

Install the wire grommet in the groove in the

right crankcase cover securely.

Install the two dowel pins and a new gasket.

Install the right crankcase cover over the

crankcase, aligning the water pump shaft

groove with the oil pump shaft.

Tighten the nine right crankcase cover bolts.

Connect the water hoses to the right

crankcase cover and water pump cover.

Add the recommended engine oil. (!4-3)

Fill the cooling system with the specified

coolant. (!3-9)

Screws

A.C.  Generator Stator

Pulser Coil

Dowel Pins

Gasket

Right Crankcase Cover

Oil Pump Shaft

Water  Pump  Shaft

Screws

• Be sure to bleed air from the water

jacket after filling the coolant.

＊

Be sure to route the stator wire under the

pulser coil.

＊