JVC hr-dvs2 Manuel D’Utilisation

Turn on the TV and select the AV mode.

LOAD A CASSETTE

Insert a VHS (or S-VHS) cassette with the record safety

tab intact.

● The recorder power comes on automatically.

The counter is reset to 0:00:00.

SELECT VHS DECK

Press VHS.

CHOOSE A PROGRAMME

Press PR +/– or the NUMBER keys to select the channel

you wish to record.

SET TAPE SPEED

Press SP/LP/EP (

). Check the SP/LP/EP indicator on

the recorder display panel to confirm the selected tape
speed.

● In EP mode, the recording time is extended three times.

● If you record a programme in EP mode on this

recorder, it is recommended that you play back the
EP-recorded tape on this recorder.

● It is not possible to select EP mode if "COLOUR

SYSTEM" is set to "MESECAM". (

 pg. 17)

START RECORDING

Press and hold RECORD and press PLAY on the remote

control, or press RECORD on the recorder. The VHS
record indicator ( ) lights.

PAUSE/RESUME

RECORDING

Press PAUSE. Press PLAY to resume recording.

STOP RECORDING

Press STOP. The VHS record indicator (

) goes off.

Then press EJECT on the VHS deck to remove the
cassette.

B.E.S.T. takes place at the beginning of both the
first SP and the first LP (or EP) recording after
inserting the cassette (

 pg. 32).

If "DIRECT REC" is set to "ON", the programme
that appears on the TV screen will be recorded
(

 pg. 16).

1

2

3

4

5

6

7

8

9

1

2

1

2

3

0

3

4

4

VHS record indicator

VHS/S-VHS
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.

Record safety tab