JVC hr-dvs2 Manuel D’Utilisation

The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to
send A code signals because your video recorder is initially set
to respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.

DISPLAY CODE

Hold down VHS or DV on the remote control over 2

seconds. The code currently set blinks on the LCD
panel.

CHANGE REMOTE

CONTROL'S CODE

Press the NUMBER key "1" for A , "2" for B , "3" for C, or

"4" for D.

SET REMOTE CONTROL'S

CODE

Press OK to set the code.

1

2

3

4

5

6

7

8

9

1

2

1

2

3

0

3

4

4

DISPLAY CODE

Press PLAY on the recorder over 5 seconds while the

recorder is turned off. The code currently set appears
on the front display panel.

● If the code displayed on the front display panel is

different from the code set on the remote control, go
to step 2.

CHANGE RECORDER'S

CODE

Press any key on the remote control. The code currently

set on the remote control will be applied to the
recorder.

During Power Save, it is impossible to change the remote
control's code.

LCD panel