JVC hr-dvs2 Manuel D’Utilisation

S

OUT
SORTIE

(DV/VHS)

ANTENNA
ANTENNE

IN

ENTREE

OUT

SORTIE

AUDIO

(DV/VHS)

L

R

AV2 (L-2)

IN/DECODER
ENTREE/DECODEUR

AV1 (L-1) IN/OUT    ENTREE/SORTIE

SAT CONTROL

CONTROLEUR SAT

OUT
SORTIE

DECODER

VCR

TV

Connect the satellite receiver to the AV2 (L-2) IN/DECODER
connector, then connect the AV1 (L-1) IN/OUT connector to the
TV's connector.

● Set "L-2 SELECT" to "A/V". (

墌

 pg. 58)

● To record a programme via the satellite receiver, select L-2

mode by pressing NUMBER keys and/or PR so that
"L-2" appears on the display panel.

● For details, refer to the instruction manual for the satellite

receiver.

Mains outlet

TV Aerial
cable

Aerial
connector

Satellite Cable

Outdoor Unit

Aerial

21-pin AV input
connector (SCART)

ANT. OUT

ANT. IN

When you set "L-2 SELECT" to "SAT" (

墌

 pg. 58), it is possible to view a satellite broadcast with the TV set to its AV mode even

if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.

● When the recorder is turned off, only a composite signal is output from the recorder to TV.

● If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video  mode.