JVC interiart lt-26c50bj Manuel D’Utilisation

Additional preparation

LT-32/26C50BJ / LCT1792-001A-U / English

„

Connect the equipment to an EXT terminal 
other than EXT-4.
You can choose between an S-VIDEO signal 

(Y/C signal) and a regular video signal 
(composite signal). For details of how to 
operate the equipment, see “S-IN (S-VIDEO 

„

Be sure to connect the T-V LINK compatible 
VCR to the EXT-2 terminal. If not, the T-V 
LINK function will not work properly.

• When connecting a T-V LINK compatible 

VCR to the EXT-2 terminal, be sure to 

connect the decoder to the VCR. If not, 
the T-V LINK function may not work 
properly.

• When you connect the decoder to the 

VCR, after you have stored TV channels 

in the programme numbers (PR) list, set 
the DECODER (EXT-2) function for the 
programme number (PR) to ON to 
unscramble a scrambled TV channel. For 

details, see “DECODER (EXT-2)” on 
page 41.

„

Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone 

socket at the TV rear panel.

• No sound comes from the TV speakers 

when the headphones are connected.

„

You can change over the output of the video/

sound signal from the EXT-2 terminal. This 
is useful when you want to dub the video/
sound from another device onto the VCR 

connected to the EXT-2 terminal. For details 
on how to do this, see “DUBBING” on 
page 44.

• The signals from EXT-4 and PC IN 

terminal cannot be output from EXT-2.

„

The video/sound signal of a TV channel you 

are viewing is always output from the EXT-1 
terminal.

• Changing over a programme number (PR) 

also changes over the TV output from the 
EXT-1 terminal.

• The video/sound signal from an EXT 

terminal cannot be output.

• Teletext programmes cannot be output.

LT-32&26C50BJ_Eng.book  Page 48  Thursday, December 2, 2004  11:15 AM