JVC UX-G60 Manuel D’Utilisation

 

• This function also affects the sound through the 

headphones.

 

• You cannot change the scanning mode to progressive in the 

following cases:
– When your TV does not support the progressive video 

input.

– When you have not connected your TV to the system 

using a component video cord.

 

•  “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this 

happens, reset the clock.

 

• On some DVD Video discs, you cannot change audio 

languages while playing back.

 

• During slow-motion playback, no sound will be 

reproduced.

• While zoomed in, the picture may look coarse.

 

• While programming steps...

Your entry will be ignored if you have tried to program an 
item number that does not exist (for example, selecting 
track 14 on a disc that only has 12 tracks).

 

• A-B Repeat can be used within the same title while playing 

a DVD Video, and within the same track for the other discs.

 

• For DVD-R/-RW in the VR format, “PG” or “PL” appears 

instead of “TITLE” on the on-screen bar.

 

• If you press ON SCREEN on the remote control during 

playback, playback information appears on the TV screen.

 

• The recording level is automatically set correctly. Thus, 

you can adjust the sound you are actually listening to 
without affecting the recording level.

• There is leader tape which cannot be recorded onto at the 

start and end of cassette tapes. Thus, when recording CDs 
or radio broadcasts, wind the leader tape first to ensure that 
the recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO REC” 

appears on the display. If a protected tape has been 
inserted, “NO REC” appears.

• You cannot open or close the disc tray while recording a 

disc.

 

• Synchronized recording does not function on the file 

format of MPEG-1, MPEG-2, ASF*, and DivX.

 

• Karaoke mode setting (Key Control and Vocal Masking) 

can be used when selecting “DVD/CD” or “USB 
MEMORY” as the source, except for DVD-VR/DVD 
Audio/MPEG-1/MPEG-2/ASF/DivX files.
Even if the source is “DVD/CD” or “USB MEMORY,” 
Karaoke mode setting cannot be used while “NO DISC” or 
“NO DEVICE” appears on the display.

• Karaoke mode setting is automatically canceled when the 

source is changed.

• When selecting “DVD/CD” or “USB MEMORY” as the 

source, the microphone is not available while playback is 
stopped or paused. To use the microphone, activate Key 
Control or Vocal Masking.

• Karaoke mode setting is also applied to the optical digital 

output signals.

• When Vocal Masking is activated, 3D Phonic will be 

canceled temporarily.

• On some music discs, Vocal Masking does not provide the 

correct effect.

• You can also use the microphone when selecting “FM,” 

“AM,” or “AUX” as the source. When selecting “TAPE”  
as the source, you can use the microphone only during tape 
playback.

 

• If you do not specify the preset station or track number 

correctly while setting a timer, the currently selected 
station or the first track will be played when the timer is 
activated.

• When you unplug the AC power cord or if a power failure 

occurs, the timer will be canceled. You need to set the 
clock first, then the timer again.

• If you set DVD Video as the source, Daily Timer will not 

work correctly.

 

• If you set the Sleep Timer after Daily Timer starts playing 

the selected source, Daily Timer is canceled.

 * 

UX-G60[U]_2.book Page 39 Monday, February 20, 2006 5:48 PM