JVC UX-G60 Manuel D’Utilisation
43
OPTICAL DIGITAL OUT Signals
*
1
For UX-G60 only
*
2
While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL
OUT terminal if the discs are not copy-protected.
OUT terminal if the discs are not copy-protected.
Operating JVC’s TVs Using the Remote Control
You can use the remote control to operate JVC’s TVs.
While holding SHIFT, press...
DIGITAL AUDIO
OUTPUT
Output Signals
Playback disc/file
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
DVD Video
with 48 kHz, 16/20/24 bit Linear PCM
48 kHz, 16 bit Linear PCM*
2
with 96 kHz, Linear PCM
48 kHz, 16 bit Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
with DTS
DTS bitstream
48 kHz, 16 bit Linear PCM
DVD Audio
*
1
with 48/96/192 kHz, 16/20/24 bit
Linear PCM
Linear PCM
48 kHz, 16 bit Linear PCM
with 44.1/88.2/176.4 kHz,
16/20/24 bit Linear PCM
16/20/24 bit Linear PCM
44.1 kHz, 16 bit Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
with DTS
DTS bitstream
48 kHz, 16 bit Linear PCM
DVD-R/-RW/-ROM in DVD-VR format
with 48 kHz, 16/20/24 bit Linear PCM
48 kHz, 16 bit Linear PCM*
2
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
SVCD, VCD, CD
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS
DTS bitstream
44.1 kHz, 16 bit Linear PCM
MP3/WMA
*
1
/DivX disc/file
32/44.1/48 kHz, 16 bit Linear PCM
ASF
*
1
disc/file
32 kHz, 16 bit Linear PCM
TV/VIDEO
TV
SHIFT
TV VOL
+,–
TV CH ,
Remote control
TV
Turn on/off TV.
TV/VIDEO
Change the input mode.
TV VOL
+
,–
Adjust the volume.
TV CH
,
Change the channels.
UX-G60[U]_2.book Page 43 Tuesday, February 7, 2006 6:04 PM