Toshiba 32zt29b Manuel D’Utilisation

25

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.

AV connections and input selection

Most video recorders and decoders send a signal through
the Scart lead to switch the TV to the correct Input socket.
Alternatively press the external source selection button 

B

repeatedly until you see the picture from your equipment.
You must use this button to view equipment connected using
the COMPONENT VIDEO INPUT (EXT 4).

on the screen indicates that the external

source has been set as a digital audio input, see below. An  

, indicates the input is set for an S-Video signal.

Input Selection

This set is provided with 2 digital audio inputs –  DA-1
and DA-2 – so that, for example, a DVD player and a
games console can stay permanently connected. 

Having connected the video signal from your DVD to, say,
COMPONENT VIDEO INPUT (EXT4) and from your
games console to Scart 3 (EXT3) you will now need to
connect the audio cables to the inputs on the back of the
set, then match the two up.

If you have connected to DA-1 (optical), select 

from the 

and press the

Q

button to highlight 

then with

the S or R buttons, select the appropriate video
input, for example EXT 4 for the DVD player.

Then for the 2nd connection, press the Q button to
highlight 

(coaxial) then with the

S or R buttons, select the appropriate video input,
for example, EXT 3 for the games console.

Again, from the 

select 

.

With Sor R change the 

option to:

Selecting the INPUT signal

This feature allows you to specify the type of signal going
into Scarts 2 (EXT 2) or 3 (EXT 3) on the back of the
television and the sockets on the front (which are also 
EXT 3). Please refer to the manufacturers’ instructions for
the connected equipment. 

From the 

select 

and

with the S or R button select either AV or S-VIDEO
as the required 

for 

and 

.

If the colour is missing try the alternative setting.

This feature enables you to select the source to output
from Scart 2. e.g. If you connect a stereo decoder to Scart

1 and a stereo video recorder to Scart 2, and select EXT 1

as the 

output (i.e. you will output the signal received

through Scart 1 directly out to Scart 2), you will be able to
record the stereo decoder transmission in stereo.

Selecting the OUTPUT signal for Scart 2

= The picture on screen.

= The last television programme selected – 

digital or analogue.

= The most recent digital programme selected.

= The most recent analogue programme selected.

= The picture from equipment connected to Scart 1.

= The picture from equipment connected to Scart 3 or 

the front input sockets.

ADDITIONAL FEATURES