Toshiba 50L2200U Manuel D’Utilisation
52
Setting up your TV
Viewing the digital signal meter
“Connecting an HDMI® or DVI device to the
HDMI® input” on page 27
.
(Sample Illustration) HDMI
®
Audio mode selection
4
To save the setting, highlight Done, and then press the ENTER
button.
button.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
“Setting the PC Audio” on page 94
.
Viewing the digital signal meter
You can view the digital signal meter in the ANT/CABLE digital
TV input source only.
TV input source only.
To view the digital signal meter:
1
Press the MENU button and open the Setup menu.
Mode:
Description:
Auto
When viewing the HDMI 1 input, if digital audio from the HDMI
®
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
detect and output analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital audio from the HDMI
®
input will be output.
Analog
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
input will be output.
NOTE