Toshiba dkt2104-ct Manuel D’Utilisation
Handset Operation
Calling the Attendant Console
Strata DKT2104-CT Cordless Digital Telephone 5/00
31
Calling the Attendant Console
There are three ways to call the Attendant Console depending upon system
programming. You can call any Attendant Console, a particular Attendant Console, or
all Attendant Consoles.
programming. You can call any Attendant Console, a particular Attendant Console, or
all Attendant Consoles.
Any Console
➤
Press a [DN] + 0. The call rings the Attendant Console. Dial 0 calls rotate between
the consoles if more than one console is installed.
the consoles if more than one console is installed.
Specific Console
Emergency Calls to All Consoles
➤
Press [DN] + #400. The call rings all consoles Emgr.
Using CO Line Access Codes
➤
Press a [DN] + the
console’s [DN]
______.
console’s [DN]
______.
The call rings the console
,Q'1
.
Note
Your System Administrator can provide the
Attendant Console [DNs].
Attendant Console [DNs].
1. Press
WDON
...or a
[DN].
You hear internal dial tone and the LED lights steady
(with INT/PDN automatic off-hook selection
programmed).
(with INT/PDN automatic off-hook selection
programmed).
2. Enter a CO Line
access code.
. You hear CO Line
dial tone and the LED continues to flash at the in-use
rate.
rate.