Toshiba dkt2104-ct Manuel D’Utilisation

1. Press 

+2/'

 on the cordless handset.

2. Pick up the DKT telephone and press the flashing Line LED.

 

1. Press

&1)751

.

You hear dial tone and the Line or

[DN] LED flashes 

at the conference rate.

2. Enter the destination 

[DN], Hunt Group 
number, or ACD 
group [DN].

You hear a single tone.

If the call was made with Tone Signaling 
instead of Voice First Signaling, you hear 
ringing tone.

3. When the [DN] 

answers, announce 
the call.

If the called station does not answer, you receive a 
recall ring (when your station or

[DN] is idle). The 

ring is set by system programming.

4.  Press 

WDON

The Line LED changes to steady when the called 
station connects with the transferred call.

...or 

/LQH

, [DN] + 

 to reconnect to 

the transferred line 
before the call is 
answered or busy 
tone is received.

The Line LED changes to steady red when the called 
station connects with the transferred call. After you 
hang up, the Line LED begins to flash at the on-hold 
rate or if you transferred the call from a [DN], the 
[DN] LED goes out. The CO Line or [DN] camps onto 
the called station and the called station receives a 
warning tone.

You receive a recall ring when your station or [DN]

is 

idle and camp-on is cancelled when the called station 
user fails to answer within a predetermined time. 
Repeat the procedure if necessary.