Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

Replacement Procedures

Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
4-29

4.8 Keyboard

Removing the keyboard

The following describes the procedure for removing the keyboard (See Figure 4-8 to 4-9).

CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the

frame and do not touch the keycap.

1. Turn the computer upside down

2. Loose the screw securing KBD Holder.

M2.5x3.0B Flat BIND screws x3

3. Upside down the computer.

4. Open the display.

5. Remove KBD holder. Insert your finger into the slot between the KBD holder and the

keyboard. Then, lift up the keyboard cover to remove it.

6. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to

remove it.

7. Disconnect keyboard cable.