Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

Replacement Procedures

4.15 CPU

Removing the CPU heat sink

The following describes the procedure for removing the CPU heat sink (See Figure 4-27).

1. Disconnect the Heat sink cable from the connector on the system board

2. Remove the following screws securing the heat sink holder along 1 to 6.

• M2.5×5.0

BIND

screw

NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse

order of the number marked on the holder.

3. Remove the CPU heat sink.

Figure 4-25 Remove the CPU heat sink

Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)