Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

The following describes the procedure for installing the LCD unit and FL inverter (See 
Figure 4-31 to 4-34). 

1.  Install the LCD supports (LCD unit side) and LCD top bracket to the LCD and secure 

them with the following screws. 

•  M2.0×2.5  BINK   screw   

 

x6 

2.  Stand the LCD unit on the display cover and connect the LCD harness to the 

connector on the back of LCD. 

3.  Stick the conductive tape on the connector of LCD harness. 

4.  Secure the LCD unit with the following screws. 

•  M2.5×5.0 

BINK 

screw 

  x4 

5.  Connect LCD harnesses to the connector CN1 of the FL inverter. 

6.  Connect HV harnesses to the connector CN2 of the FL inverter. 

7.  Install the display mask while fitting the latches. 

8.  Secure the display mask with following screws 

                   M2.5

×5.0  

BIND screw    X8 

9.  Cover screws with  Screw rubber cover    X8