Toshiba dynabook v1 v2 satellite p300 Instruction De Maintenance

4 2 

This chapter describes the procedure for removing and replacing the field replaceable units 
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one. 
The chart below provides a guide as to which other FRUs must be removed before a 
particular FRU can be removed. The numbers in the chart indicate the relevant section 
numbers in this manual. 

In all cases when removing an FRU, the battery pack must also be removed. When repairing 
an FRU that is the potential cause of a computer fault, use the chart to determine the order in 
which FRUs need to be removed. 

The tilt stand, if it is installed, can be removed without any other FRUs removed. 

 

• Chart Notation 

The chart shows the case for the 
following example: 

• Removing a MDC

 

All FRUs down to the “4.2 Battery 
pack” to “4.11 Cover assembly” above 
a SD board/Microphone/MDC must be 
removed.