Toshiba dynadock pa3686u-1set Manuel D’Utilisation

29

In the Network Connections folder, double-click the 
Connection icon for the dynadock’s Ethernet adaptor, which is 
indicated by ASIX AX88772A USB2.0 to Fast Ethernet 
Adaptor. This will open the Local Area Connection Properties 
window for you to configure the network settings as required 
according to your network environment. If you are unsure 
about the settings, consult your network administrator for 
assistance.

The dynadock's Network port does not support Wake-up-on-LAN. 

The Local Area Connection icon in the System tray/Notification Area 
of your Windows

®

 desktop will not show a connection. Open 

"Network Connections" to view the Ethernet Connection.

You can connect a digital (DVI) or analog (VGA) monitor to the 
dynadock™. Only one monitor can be connected to the dynadock™ 
at a time.

To connect a monitor to the dynadock™:

If you are connecting a VGA monitor, attach the DVI-I to VGA 
adaptor (included with the dynadock™) to the DVI-I video 
port on the dynadock™.

Connect the monitor cable (not provided) to the DVI-I video 
port on the dynadock™ or to the adaptor you connected in 
step 1.

Connect the other end of the cable to the external monitor.

The monitor cable can be connected/disconnected at any time 
without disconnecting the dynadock™ from your computer.

By default, the external monitor is set to Extended mode. To 
switch to Mirror mode, see 

If no output is seen on the monitor connected to the dynadock™, the 
current video resolution setting may not be supported by the 
monitor. This can happen if the monitor does not report its supported 
modes to the dynadock’s DVI component. Adjust the resolution of the 
external monitor until an image is shown. For more information, see