Toshiba dynadock pa3686u-1set Manuel D’Utilisation

57

To charge a device when the dynadock™ is disconnected or the 
connected computer is off:

Make sure the dynadock's AC adaptor is connected to an 
electrical outlet.

Connect the device you want to charge to one of the dynadock's 
front USB ports.

Press the Dock/Undock button once. The indicator light glows 
orange to indicate charging is in progress.

To stop charging the device, press the Dock/Undock button again. 
The indicator light turns off.

When your docked computer enters standby/sleep/hibernation 
mode, devices connected to the dynadock™ will not function until 
the computer returns to an active state. For example, if you are 
using the Ethernet port for high-speed network access, network 
access will not be available until the computer resumes from 
standby/sleep/hibernation.

In addition, please keep in mind the following important 
information regarding the affect of standby/sleep/hibernation mode 
on external monitors connected to the dynadock™:

❖

The external monitor connected to the dynadock™ will go 
blank if the computer enters standby/sleep/hibernation mode.

❖

In Mirror mode, the external monitor retains the settings it had 
previously when the computer resumes from standby/sleep/
hibernation.

❖

In Extended mode, windows that were previously on the 
external monitor may appear on the computer's built-in display 
when the computer resumes from standby/sleep/hibernation. 
You may need to reposition the windows by dragging them to 
the external desktop again.

❖

If the external monitor is in Extended mode and the computer 
requires you to log in after resuming from standby/sleep/
hibernation, the login screen will appear on the primary 
computer monitor, not the external monitor. This is consistent 
with Windows

® 

operating system standards.