Toshiba dynadock pa3686u-1set Manuel D’Utilisation

68

USB device does not work.

Make sure the dynadock™ is connected to your computer 
(wirelessly or with a USB cable) and the computer is docked 
(indicator light on dynadock™ is green).
Check that the cable connection between the USB port on the 
dynadock™ and the USB device is secure.
Make sure that the USB device drivers are properly installed. 
Refer to the operating system documentation for more 
information.
Make sure that the AC adaptor (if applicable) is connected 
securely to the USB device and a live electrical outlet.
Refer to the documentation that came with the USB device.

A USB device(s) connected 
to the dynadock™ does not 
work after resumption from 
standby/sleep/hibernation 
or restart. Yellow 
exclamation points appear in 
the Windows Device 
Manager next to one or more 
of the connected USB 
devices.

This problem may occur when there are six USB devices 
connected to the dynadock™ and the computer enters standby/
sleep/hibernation mode or is restarted. To resolve the issue, 
disconnect and then re-connect one of the USB devices.

The dynadock™ is not 
charging the USB device.

Make sure that the USB device is connected to one of the front 
powered USB ports.
Make sure the AC adaptor/cord is firmly connected to the 
dynadock™ and a live electrical outlet.
Make sure that “Charge mode” is enabled. See 

Make sure that the dynadock's blue power light is on.
Some USB devices may not support this feature.

My real-time device (for 
example, a Web camera, 
microphone, or speakers) 
does not operate properly 
when connected to the 
dynadock™.

Due to USB bandwidth limitations, real-time devices (for 
example, Web cameras, microphones, and speakers) may not 
operate properly if more than two such devices are connected 
to the dynadock

™

 at the same time.