Toshiba IK-WD14A Manuel D’Utilisation

19

19

Based  on  the  live  image  retrieved  from  the  camera,  adjust  the  camera  lens  by 

performing the following:

1. Turn the lens module left and right. 

2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens 

module up and down. Upon completion, tighten the screws.

3. Turn the lens cover to adjust the image orientation. 

DO NOT over rotate the lens. Doing

so  will  damage  the  camera  lens       

module

This camera is able to output an analog NTSC or PAL video signal and sound from the 

Audio/Video Out jack.

Adjustment of Viewing angle is possible using a portable monitor without using a 

personal computer when installing.

Use the included AV Out cable for this purpose.

When adjusting the viewing angle, the camera focus may shift.

In this case, push the focus button on the camera body for 2 seconds or more. The 

zoom lens will move to a wide position and the focus will move to the optimal position.

l 

Depending on an object's conditions, the focus may not move to the optimal

 position.

In this case, focus the lens manually from your personal computer.