Toshiba qosmio f60 Manuel D’Utilisation

User’s Manual

4-43

Operating Basics

Your PC has multiple charging modes so that many different USB devices 

can be supported for USB Sleep and Charge function. Typical Mode 

(Default) is suitable for a wide range of digital audio players. 
However, determining which mode is suitable for your USB device is 

unknown without trying. Try each mode, using the following procedure, 

from Typical Mode to Alternate Mode(*1) to find the suitable mode for 

your USB device to charge.  
This function may not be able to be used with some connected external 

devices even if the appropriate mode is selected. In this situation, clear the 

"USB Sleep and Charge" check box and stop using this function. 
*1. Some computers may not support all modes.

This utility can be used to specify the lower limit of remaining battery life for 

USB Sleep and Charge. Move the slider bar to specify the lower limit. If the 

remaining battery life falls below the setting, the USB Sleep and Charge 

function will be stopped. Clearing the "Enable under Battery Mode" check 

box sets the utility to only charge when the AC adaptor is connected.

To protect against overheating, the processor is equipped an internal 

temperature sensor which activates a cooling fan or lowers the processing 

speed if the computer's internal temperature rises to a certain level. You are 

able to select whether to control this temperature by either turning on the 

fan first, then if necessary lowering the processor speed, or by lowering the 

processor speed first, then if necessary turning on the fan - these functions 

are controlled within the Power Options.
When the processor's temperature falls to a normal range, the fan will be 

turned off and the processor operation returned to its standard speed.