Toshiba qosmio f60 Manuel D’Utilisation

User’s Manual

6-8

Power and Power-Up Modes

4. Connect the AC adaptor to the DC IN 19V jack of the computer, and 

to a wall outlet that is supplying power. The DC IN indicator should 

glow white, and the Battery indicator should glow orange to indicate 

that the battery pack is being charged, however, in the event that 

DC IN indicator does not glow this indicates that power is not being 

supplied - check the connections for the AC adaptor and the power 

cord.

5. Charge the battery pack until the Battery indicator glows white.

■

If you have extra battery packs, rotate their use.

■

If you will not be using the system for an extended period, for example 

for more than one month, remove the battery pack from the computer.

■

Store spare battery packs in a cool dry place out of direct sunlight.

Please be aware that the battery pack is classified as a consumable item.
The operating life of the battery pack will gradually reduce through 

repeated charging and discharging, and will need to be replaced when it 

reaches the end of its operating life. In addition to this, you might also 

replace a discharged battery pack with a charged spare when you are 

operating your computer away from an AC power source for an extended 

period of time.
This section explains how to remove and install the battery pack, and 

begins with the removal process which is detailed through the following 

steps.

To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the computer's power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.

■

■

Hard Disk Drive indicator to go out.

■