Toshiba NB505 Manuel D’Utilisation

User’s Manual

3-23

NB500/NB505/NB520/NB525/NB550D/NB555D Series

Some models are equipped with an external monitor port.
An external analog monitor can be connected to the external monitor port 

on the computer. To connect a monitor, follow the steps as detailed below:

1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port.             

3. Turn the external monitor's power on.
4. Turn the computer's power on.

When you turn on the power, the computer will automatically recognize the 

monitor and determine whether it is a color or monochrome device. In the 

event that you find that there are issues getting an image displayed on the 

correct monitor, you should consider using the FN + F5 hot key to change 

the display settings (if you then disconnect the external monitor before you 

turn the computer's power off, be sure to press FN + F5 hot key again to 

switch to the internal display).
Please refer to the 

 section for further details on using hot 

keys to change the display setting.

When displaying desktop at external analog monitor, desktop is sometimes 

displayed on the center of the monitor with black bars around desktop (with 

small size).
At that time, please read the manual of the monitor and set the display 

mode which is supporting at the monitor. Then it will be displayed with 

suitable size with correct aspect ratio.

1. Monitor cable

2. External monitor port

2

1