Toshiba portege 610ct 620ct Instruction De Maintenance

4-36

To remove the 610CT display mask, follow the steps below and refer to figure 4-25.

1.

Turn off the power to the 610CT.  Disconnect the AC adapter, power cord, and all
external cables connected to the computer.

2.

Remove the battery pack, optional memory module and PCMCIA card as de-
scribed in sections 4.2, 4.3, and 4.4.

3.

Remove two rubber seals from the display hinges to expose screws securing the
display mask.

4.

Remove two brass M2.5x6 screws at the bottom corners of the display mask.

5.

Slip your fingers between the top of the display’s cover and the display mask and
pull out gently to release six latches. Start with the latches at the center.

6.

Continue around the plastic cover to release four latches on each side and five
latches at the bottom.