Toshiba portege m400 Manuel D’Utilisation

User’s Manual

9-11

Troubleshooting

USB floppy disk drive

For more information, refer to Chapter 4, 

. 

PC card

Refer also to Chapter 8, 

Check the type of CD/DVD you are using. The 
drive supports:

DVD-ROM:

DVD-ROM, DVD-Video

CD-ROM:

CD-DA, CD-Text, Photo CD

TM

 

(single/multi-session), CD-ROM 
Mode 1, Mode 2, CD-ROM XA 
Mode 2 (Form1, Form2), Enhanced 
CD (CD-EXTRA), Addressing 
Method 2

Check the region code on the DVD. It must 
match that on the DVD Super Multi drive. Region 
codes are listed in the 

 

section in Chapter 2, The Grand Tour.

Drive does not operate There may be a faulty cable connection. Check 

the connection to the computer and to the drive.

Some programs run 
correctly but others do 
not

The software or hardware configuration may be 
causing a problem. Make sure the hardware 
configuration matches your software needs.

You cannot access the 
external 3 1/2" floppy 
disk drive

Try another floppy disk. If you can access the 
floppy disk, the original floppy disk (not the drive) 
is probably causing the problem.

If problems persist, contact your dealer.

PC card error occurs 

Reseat the PC card to make sure it is firmly 
connected.

Make sure the connection between the external 
device and the card is firm.

Check the card’s documentation.

If problems persist, contact your dealer.