Toshiba protege pt311u0dj02v Manuel D’Utilisation

52

Before adding external devices or memory, Toshiba recommends 
setting up your software. See 

Memory modules can be installed in the memory module slots on 
the base of the computer. You will need a small Phillips screwdriver 
for this procedure.

If the computer has been running recently, the memory module(s) 
may be hot. The surrounding area may also be hot. Allow the 
module(s) to cool to room temperature before replacing it. Avoid 
touching the cover, the module(s), and the surrounding area before 
they have cooled. Failure to follow these directions could result in 
minor bodily injury.

To avoid damaging the computer’s screws, use a small Phillips 
screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You can 
install one or two memory modules.

Before you install or remove a memory module, turn off the computer 
using the Start menu. If you install or remove a memory module 
while the computer is in Sleep or Hibernation mode, data will be lost.

For this model, Slot A is the bottom slot. Slot B is the top slot. If only 
one memory module is to be installed, it must be installed in Slot A.