Toshiba satellite 14.4 psu5ru-00q003 Manuel D’Utilisation

65

To connect an HDMI

®

-compatible television or display device to 

the computer:

❖

Connect one end of an HDMI

®

 cable (not included with your 

computer) to the HDMI

®

 Out port on the side of your 

computer, and then connect the other end of the cable to your 
television or display device. Refer to the manual that came 
with the television or display device for more information.

Your computer will automatically detect the external display 
device. 

In the future you can change the display settings by pressing 

F4

, or 

by configuring the display properties settings.

Once you have connected an external display device, you can 
choose to use the internal display only, the external device only, or 
both simultaneously. 

Some modes are only available with the appropriate device attached 
and turned on.

The quickest way to change the display output settings is to use the 
display hot key (

F4

):

Press 

F4

 repeatedly until the setting you want takes effect. Briefly 

pause each time you press the 

F4

 key to allow time for the display to 

change.

This hot key cycles through the settings in the following order (the 
last two options are available if an external monitor is connected):

❖

Built-in display only

❖

Built-in display and external monitor simultaneously

❖

External monitor only

❖

Built-in display and external monitor (extended desktop)