Toshiba reliability in motion 1000 Manuel D’Utilisation

 

 

XIII

This manual contains important instructions that should be followed during the 

installation, maintenance, and operation of the UPS and its batteries to assure safe and 

proper operation. 

1.  Turn off, lockout, and tagout all power sources before connecting the power wiring 

to the equipment or when performing maintenance. 

2.  Hardwire type UPS units are not equipped with an over-current protection device, 

nor do they have an output disconnect for the ac output. Therefore, a user-installed 

circuit breaker should be provided between the UPS output and the load input. 

3.  The maximum ambient operating temperature is 104° F (40° C). 

4.  Battery servicing should be performed by a qualified Toshiba Representative only. 

5.  Unauthorized personnel should not service batteries. 

6.  Contact your nearest Toshiba authorized service center for battery replacement. 

Qualified Personnel is one that has the skills and knowledge relating to the 

construction, installation, operation, and maintenance of the electrical equipment and 

has received safety training on the hazards involved (Refer to the latest edition of NFPA 

70E for additional safety requirements). 

1.  Have read the entire operation manual. 

2.  Be trained and authorized to safely energize, de-energize, ground, lockout and tag 

circuits and equipment, and clear faults in accordance with established safety 

practices. 

3.  Be trained in the proper care and use of protective equipment such as safety shoes, 

rubber gloves, hard hats, safety glasses, face shields, flash clothing, etc., in 

accordance with established safety practices. 

4.  Be trained in rendering first aid. 

5.  Be knowledgeable of batteries and the required handling and maintenance 

precautions.