Toshiba satellite 17.3-inch laptop s875-s7248 Manuel D’Utilisation

89

Place the disc carefully in the disc tray, label side up, and 
gently press the disc onto the center spindle until it clicks into 
place.

Handle DVDs and CDs carefully, making contact only with the center 
hole and edge. Do not touch the surface of the disc. Do not stack 
discs. If you incorrectly handle the discs, you could lose data.

Make sure the disc is completely on the spindle and is lying flat 
on the tray.

If you insert the disc incorrectly, it may jam the drive. If this happens, 
contact Toshiba support for assistance.

Push the disc tray in by pressing gently on the center of the tray 
until it clicks into place.

To remove an optical disc with the computer turned on:

Press the eject button on the drive.

Do not press the eject button while the drive in-use indicator light is 
glowing. Doing so could damage the disc or the drive. 

Also, if the disc is still spinning when you open the disc tray, wait for 
it to stop spinning before you remove it. 

Remove the disc, and place it in its protective cover.

Gently press the tray in to close it.

If you insert an optical disc into the optical disc drive and the 
Auto-Run feature does not automatically start your disc, try 
launching the optical disc manually. To do this, follow these steps:

Click the Start button, and then Computer.

Double-click the optical disc drive icon.

The drive will run the optical disc.