Toshiba satellite m40 Manuel D’Utilisation

Page de 267
94
Learning the Basics
Using PC Cards
5.375 x 8.375 ver 2.3
Do not apply a label to or otherwise mar the surface of a 
disc.
Hold a disc by its outside edge. Fingerprints on the 
surface can prevent the DVD-ROM drive or multi-
function drive from reading the data properly.
Do not expose discs to direct sunlight or extreme heat or 
cold.
To clean a disc that is dirty, wipe it with a clean, dry 
cloth. The most efficient method to clean it is to start 
from the center of the disc and wipe toward the outward 
edge (not in a circle). If necessary, moisten the cloth with 
water or a neutral cleaner (not benzine or rubbing 
alcohol). Let the disc dry completely before inserting it in 
the drive.
Using PC Cards
TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check 
the package to make sure they conform to the PCMCIA 2.1 
standard (or later). Other cards may work with your computer, 
but are likely to be much more difficult to set up and use.
For information on inserting or removing a PC Card, see 
Hot swapping
With PC Cards, you can replace one PC Card with another 
while the computer is on. This is called “hot swapping.”
Hot swapping precautions
Although you can insert a PC Card at any time, remember not 
to remove a card while it is in use. Otherwise, you could lose 
valuable information. For example: