Toshiba satellite l450 Manuel D’Utilisation
78
Getting Started
Using external display devices
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
and turned on.
The quickest way to change the display output settings is to use the
display hot key (
display hot key (
Fn
+
F5
):
1
While holding down
Fn
, press
F5
repeatedly, pausing between
each press, until the setting you want takes effect.
This hot key cycles through the settings in the following order:
❖
Built-in display only
❖
Built-in display and external monitor simultaneously
❖
External monitor only
❖
TV (or other external video device) only
❖
External monitor and TV simultaneously
❖
Built-in display and TV (or other external video device)
simultaneously
simultaneously
❖
Built-in display and external monitor (extended desktop)
❖
Built-in display and TV (extended desktop)
❖
External monitor and TV (extended desktop)
❖
Swap-Switch primary display between internal display
and external monitor when using extended desktop
and external monitor when using extended desktop
(Sample Image) Display options window
2
Release the
Fn
key.
NOTE