Toshiba satellite notebook l355-s7907 Manuel D’Utilisation
62
Getting Started
Using external display devices
2
While holding down
Fn
, press
F5
repeatedly until the setting
you want takes effect. Briefly pause each time you press the
F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
(the last two options are available if an external monitor is
connected):
❖
LCD—Internal display only
❖
LCD + CRT—Internal display and external monitor
simultaneously
simultaneously
❖
CRT—External monitor only
❖
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
monitor, with one acting as the primary display and the
other as an extended desktop
❖
Swap—Switch primary display between internal display
and external monitor when using extended desktop
and external monitor when using extended desktop
(Sample Image) Display options window
3
Release the
Fn
key.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.