Toshiba satellite l640 ez1411 Manuel D’Utilisation

81

Once you have connected an external display device, you can 
choose to use the internal display only, the external device only, or 
both simultaneously. 

Some modes are only available with the appropriate device attached 
and turned on.

The quickest way to change the display output settings is to use the 
display hot key (

Fn + F5

):

Press 

Fn

 and 

F5

 simultaneously.

While holding down 

Fn

, press 

F5

 repeatedly until the setting 

you want takes effect. Briefly pause each time you press the 

F5

 

key to allow time for the display to change.

This hot key cycles through the settings in the following order 
(the last two options are available if an external monitor is 
connected):

❖

Built-in display only

❖

Built-in display and external monitor (simultaneously)

❖

External monitor only

❖

Built-in display and TV (or other external video device)

❖

TV (or other external video device)

❖

External monitor and TV

❖

Built-in display and external monitor (extended mode)

❖

Built-in display and TV (extended mode)

❖

External monitor and TV (extended mode)

❖

Swap-Switch primary display between internal display 
and external monitor when using extended desktop