Toshiba satellite p100-p105series Manuel D’Utilisation

31

RG 5.375 x 8.375 ver 2.3.3

If your printer does not support Plug and Play, you must set 
up the printer as described in “Setting up a printer” in the 
electronic user’s guide.

To connect a USB printer to your computer:

Connect the printer cable to the printer and then connect 
the other end to one of the computer’s USB ports.

Plug the printer’s power cable into a live electrical outlet.

See your printer documentation for additional configuration 
steps, or see “Setting up a printer” in the electronic user’s guide.

HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. 

Your computer comes with enough memory to run most of 
today’s popular applications. You may want to increase the 
computer’s memory if you use complex software or process 
large amounts of data.

For more information on memory options, check the 
accessories information that came with your computer, or 
visit accessories.toshiba.com.

Additional memory modules can be installed in the memory 
module slots on the base of the computer. You will need a 
standard Phillips No. 1 screwdriver for this procedure.

If you use the computer for a long time, the memory module will 
become hot. If this happens, let the module cool to room temperature 
before you replace it.

To avoid damaging the computer’s screws, use a standard Phillips 
No. 1 screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.