Toshiba satellite m35x Manuel D’Utilisation

169

 

 

 

 

 

5.375 x 8.375 ver 2.3

Here are some typical display problems and their solutions:

Display Auto Off may have gone into effect. Press any key to 
activate the screen.

You may have activated the instant password feature by 
pressing 

Fn 

and

 F1 

simultaneously. If you have registered a 

password, press the 

Enter key

, type the password and press 

Enter

. 

If no password is registered, press 

Enter

. The screen reactivates 

and allows you to continue working.

If you are using the built-in screen, make sure the display 
priority is not set for an external monitor. To do this, press 

Fn

 

and 

F5

 simultaneously (once). If this does not correct the 

problem, press 

Fn

 and 

F5 

simultaneously again to return the 

display priority to its previous setting.

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cable is firmly plugged 
into a working power outlet.

❖

Check that the cable connecting the external monitor to 
the computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the 
external monitor.

❖

Press 

Fn

 and 

F5

 simultaneously to make sure the display 

priority is not set for the built-in screen.

You can change the display settings by clicking a blank area 
of the desktop with the secondary control button, then 
clicking Properties. This opens the Display Properties dialog 
box. The Appearance tab of this dialog box allows you to 
choose the colors for the screen. The Settings tab allows you 
to choose the screen resolution.